Sit ‘n’ Sew
If you need a little company while sewing a project, come Sit and Sew at the Viking Sewing Gallery! This class is for those at an intermediate level of sewing as it may include opinions and suggestions from a professional Viking Employee rather than instruction.
We will finally assemble the quilt according to the diagram below! As preparation, please go ahead and cut down your blocks to the size it says at the end of each block’s instructions. Remember to bring all of your blocks with you, as well as the sewing supplies listed below.
Sewing Supplies:
This class will be to teach you how to use your 5D Quilt Design Creator software. This is a separate software than all of the other 5D software’s.
This will be a class for new machine owners.
Join us with your new machine to learn the basics
This will be a class for new machine owners.
Join us with your new machine to learn the basics
Serger Basics
This class is an introduction to your new serger. Learn the basic features of your machine including basic serger stitches. Please bring your machine, accessories, machine owner’s manual, and serger thread.
Includes the following machines:
There is no charge for this class if the machine was purchased from a Viking Sewing Gallery. Need to bring your machine, power cord, foot control, and book to class.
Sharon will be teaching a Raw Edge Applique Baby Quilt Class. You will learn how to use the AccuQuilt Go Cutter and the Rotary and cutting board. This class will be broken down to 5 classes. Supply list will be emailed to you when you sign up for the class. Seating will be limited to 4 people, so hurry and sign up now!
Sharon will be teaching a Raw Edge Applique Baby Quilt Class. You will learn how to use the AccuQuilt Go Cutter and the Rotary and cutting board. This class will be broken down to 5 classes. Supply list will be emailed to you when you sign up for the class. Seating will be limited to 4 people, so hurry and sign up now!
Sharon will be teaching a Raw Edge Applique Baby Quilt Class. You will learn how to use the AccuQuilt Go Cutter and the Rotary and cutting board. This class will be broken down to 5 classes. Supply list will be emailed to you when you sign up for the class. Seating will be limited to 4 people, so hurry and sign up now!
BEGINNER
Give us a call for further information
Serger Basics
This class is an introduction to your new serger. Learn the basic features of your machine including basic serger stitches. Please bring your machine, accessories, machine owner’s manual, and serger thread.
Includes the following machines:
There is no charge for this class if the machine was purchased from a Viking Sewing Gallery. Need to bring your machine, power cord, foot control, and book to class.
Sharon will be teaching a Raw Edge Applique Baby Quilt Class. You will learn how to use the AccuQuilt Go Cutter and the Rotary and cutting board. This class will be broken down to 5 classes. Supply list will be emailed to you when you sign up for the class. Seating will be limited to 4 people, so hurry and sign up now!
Connectivity and Advanced Embroidery
Embroidery Basics was just the start. During this Connectivity and Advanced Embroidery Class, you will customize designs and learn how to interface your machine with your computer. You can then transfer designs to and from your computer directly to your embroidery machine. Please bring your embroidery machine, all accessories, embroidery arm and your computer if it is a laptop.
Includes the following machines:
Having attended Machine Introduction, Decorative Stitches and Embroidery Basics are helpful, but not necessary.
There is no charge for this class if the machine was purchased from a Viking Sewing Gallery. You need to bring your machine, embroidery arm, power cord, foot control, and book to class.
Space is limited.
You will receive a 15% discount on anything you purchase the day of class. (excludes machines and software).
Make this cute banner to decorate for the autumn season. Hang it on the fireplace, the bookshelf, or on the wall.
Make this cute banner to decorate for the autumn season. Hang it on the fireplace, the bookshelf, or on the wall.
Whether it’s storing cash, a check book, calendar, iphone, coupons, or photos, wallets are one of the most practical and thoughtful gifts you could make for yourself or others. This wallet uses a new design collection meant to decorate your fabric before you sew.
Whether it’s storing cash, a check book, calendar, iphone, coupons, or photos, wallets are one of the most practical and thoughtful gifts you could make for yourself or others. This wallet uses a new design collection meant to decorate your fabric before you sew.
We’re getting down to the last few blocks in this quilt, and I must say it’s going to be a very special quilt.
We’re getting down to the last few blocks in this quilt, and I must say it’s going to be a very special quilt.
We’re getting down to the last few blocks in this quilt, and I must say it’s going to be a very special quilt.
This beautiful table topper has a multitude of options. Halloween, Thanksgiving, Christmas color motifys, not to mention using your home décor. This class is a two day class.
Join and Fold Edging Foot is the foot of month for Quilt Block #10
Don’t forget you get a 15% discount on anything you purchase the day of class. (Excluding machines and software)
Supply list will be emailed to you. Need to bring your machine, power cord, foot control, accessories, and book to class.
This beautiful table topper has a multitude of options. Halloween, Thanksgiving, Christmas color motifys, not to mention using your home décor. This class is a two day class.
For those of you who have the QuiltDesign Creator module, this is a great wa to use the “Start a New Block” option in the Design Wizard of the this software.
For those of you who have the QuiltDesign Creator module, this is a great wa to use the “Start a New Block” option in the Design Wizard of the this software.
Machine Introduction
This class is an introduction to your new Husqvarna Viking® or Singer® sewing machine. Learn the basic features of your machine including how to create buttonholes and do a blind hem. Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.
Includes the following machines:
Need to bring your machine, power cord, foot control, and book to class.
There is no charge for this class if the machine was purchased from a Viking Sewing Gallery.
This is a very cute Apron for kids!
You will need to purchase the pattern ahead of time as it shows the supplies that you need. You will also need to cut out the pattern pieces and bring them with you to class.
We are going to be making this adorable baby quilt! We will be doing this quilt from start to finish. This class will be set up in 5 parts so as to have enough time for every step. When you buy the pattern it comes with instructions for several sizes but in class we will be making the baby size. Once you learn the technique of this quilt then you can make it in any size you would like.
This is a great quilt to use up all of your scraps!
Fabric List
Quilt size: 34″ x 46″
# of Rows: 3
Assorted 2 1/2″ strips: 16
Contracting Fabric*: 1 yard
Backing: 1 1/2 yards
Inspira fusible fleece batting: 45″ x 60″
*Includes Background & Binding
Supplies List
This will be a class for new machine owners.
Join us with your new machine to learn the basics
Beautiful hexagon place mat
Easier than you think! Learn the basics of putting in a zipper. Please bring your machine & all accessories, zipper & thread.
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Monday, November 11 from 2-4pm – Part 1
Monday, November 18 from 2-4pm – Part 2
Monday, November 25 from 2-4pm – Part 3
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Monday, November 11 from 2-4pm – Part 1
Monday, November 18 from 2-4pm – Part 2
Monday, November 25 from 2-4pm – Part 3
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Monday, November 11 from 2-4pm – Part 1
Monday, November 18 from 2-4pm – Part 2
Monday, November 25 from 2-4pm – Part 3
Learn basic quilting techniques while making a holiday rag quilt.
Class will include two 2 hour sessions to complete the project.
Cost of class is $30 plus materials.
Class dates:
Saturday, October 19 from 2:30-4:30
Saturday, October 26 from 2:30-4:30
Learn basic quilting techniques while making a holiday rag quilt.
Class will include two 2 hour sessions to complete the project.
Cost of class is $30 plus materials.
Class dates:
Saturday, October 19 from 2:30-4:30
Saturday, October 26 from 2:30-4:30
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Tuesday, October 8 from 5-7pm – Part 1
Tuesday, October 15 from 5-7pm – Part 2
Tuesday, October 22 from 5-7pm – Part 3
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Tuesday, October 8 from 5-7pm – Part 1
Tuesday, October 15 from 5-7pm – Part 2
Tuesday, October 22 from 5-7pm – Part 3
Make an elegant quilted Christmas tree skirt while learning to use a Ruffler foot and an Interchangeable Walking foot.
This class will include a total of 3 two hour classes to complete the project.
Cost of the class is $60 plus materials. (Ruffler and Interchangeable feet are required)
Dates for Classes:
Tuesday, October 8 from 5-7pm – Part 1
Tuesday, October 15 from 5-7pm – Part 2
Tuesday, October 22 from 5-7pm – Part 3
Learn to use decorative stitching on the serger to make a quick and easy Christmas Stocking using left over fabric scraps.
Class will include one two hour class to complete the project.
Cost for the class is $10 plus materials.
Class will be Monday, October 28 4:00-6:00pm.
***Registration required
Learn to use decorative stitching on the serger to make a quick and easy Christmas Stocking using left over fabric scraps.
Class will include one two hour class to complete the project.
Cost for the class is $10 plus materials.
Class will be Monday, October 14 4-6pm.
***Registration required
Introduction to your machine: learn the basic features of your machine, how to thread it, wind a bobbin, access your stitches and basic care.
Please bring your machine, foot pedal, power cord, accessories, owner’s manual and 1 spool of sewing machine thread.
This class is free if you purchased your machine at Viking Sewing Gallery. Classes fill up quickly, so please register early.
Includes the following machines:
The Husqvarna Viking Emerald 116 & 118
All of our Singer Machines
No charge for this class.
Introduction to your machine: learn the basic features of your machine, how to thread it, wind a bobbin, access your stitches and basic care.
Please bring your machine, foot pedal, power cord, accessories, owner’s manual and 1 spool of sewing machine thread.
This class is free if you purchased your machine at Viking Sewing Gallery. Classes fill up quickly, so please register early.
Includes the following machines:
The Husqvarna Viking Emerald 116 & 118
All of our Singer Machines
No charge for this class.
Introduction to your machine: learn the basic features of your machine, how to thread it, wind a bobbin, access your stitches and basic care.
Please bring your machine, foot pedal, power cord, accessories, owner’s manual and 1 spool of sewing machine thread.
This class is free if you purchased your machine at Viking Sewing Gallery. Classes fill up quickly, so please register early.
Includes the following machines:
The Husqvarna Viking Emerald 116 & 118
All of our Singer Machines
No charge for this class.
Learn to use your new serger. We will cover the 4 thread overlock and 3 thread rolled hem, and learn to care for our machine. This class is for the following machines purchased at the Viking Sewing Gallery:
Viking S21 and S25
Viking H Class 200S
Singer 14CG754
There is no cost for this class.
This will be a class for new machine owners.
Join us with your new machine to learn the basics
Explore your software! Learn how to load one of over 700 embroideries and create a unique design! Use Letters in 5D™ Embroidery to create new SuperFont with specialty fill properties, then Snap them to the design. Combine, Colorsort, then add a frame to finish up and in 5D™ Organizer, add Trim Commands. Please, bring your laptop with 5D™ Embroidery system installed and a dongle.
This Serger class II will teach Coverstitch for S21 Serger and Coverstitch / 5 thread sewing for S25. There will be many techniques taught in this class to help you to know your serger and be able to do all those many projects you are looking forward to doing.
Prerequisite for this class is to take Serger Class I . This will reserve your spot in this class.
Bring Serger, book, all accessories, four different colors of thread, scissors.
Class Time: 6:00pm- 7:30 pm
Conquer threading, loopers and adjusting tension on your new Serger purchased from our Viking Sewing Gallery.
You will need to bring Your Serger, four different colors of thread and scissors to class.
Limited space so sign up early.
Date: October 10, 2013, Thursday 6:00pm – 7:30 pm
Husqvarna Viking 5D Software Class.
Learn how to use your new Software purchased from us. You will learn the basic software operations.
You will be signed up for this class automatically when you take Software class I – Connect & Organizer 5D .
MUST HAVE SOFTWARE LOADED on your computer and the dongle working.
Supply list: dongle, software book. Bring laptop (if you have one,) & must have mouse.
