Machine Owners’ Class 2 – Decorative Sewing

Open-Toe-Foot-412800945-V-NRf

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • All Husqvarna Viking® Models with decorative stitch capabilities.
  • All Singer® Models with decorative stitch capabilities.

Having attended Machine Introduction is helpful, but not necessary. Please preregister for this class.

No charge for this class

Machine Owners’ Class 2 – Decorative Sewing

Open-Toe-Foot-412800945-V-NRf

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • All Husqvarna Viking® Models with decorative stitch capabilities.
  • All Singer® Models with decorative stitch capabilities.

Having attended Machine Introduction is helpful, but not necessary. Please preregister for this class.

No charge for this class

Beginner Quilting Part 2

This is PART TWO of a two part course. You must have completed part one, in order to participate!

Learn the basics of quilting by completing a place mat or table runner sized quilt. This is a two part class. In part one, you’ll learn rotary cutting and piecing techniques. In class two (one week  later) you’ll quilt and bind your small project! You’ll go home with instructions to make larger projects using the same design. We’ll use a traditional Disappearing Nine Patch quilting pattern provided by Colette Wilson.  A supply list will be sent via email with your registration confirmation.  Required: Your Viking or Singer machine, in good sewing condition. It is recommended that you be familiar with your machine operation before you tackle this class.  Preregistration is required, space is limited.

Supplies: refer to your handouts from class one for size, and bring your quilt batting, and backing for the project. Don’t forget your homework:  Cut three, 3″ strips cut from the width of your coordinating fabric for your borders(you’ll need 1/2 yard for this and binding fabric).   Cut three 2.5″ strips from the the width of fabric for your binding.   Bring your walking foot (if you have one), and a quilting thread… be sure it is marked for “machine quilting” and is not “glace or glazed” (that is for hand quilting!). Call with any questions: 512-280-2334.

Your email is required so we can send you the supply list! All supplies are readily available at Jo-Ann or your local quilt shop.

Beginner Quilting Part 1

Cost: Free to Viking Sewing Gallery Customers

Learn the basics of quilting by completing a place mat or table sized quilt. This is a two part class. In part one, you’ll learn rotary cutting and piecing techniques. In class two (one week later) you’ll quilt and bind your small project! You’ll go home with instructions to make larger projects using the same design. We’ll use a traditional Disappearing Nine Patch quilting pattern provided by Colette Wilson. A supply list will be sent via email with your registration confirmation. Required: Your Viking or Singer machine, in good sewing condition. It is recommended that you be familiar with your machine operation before you tackle this class.  Call 512-280-2334 for more information. Space is limited, preregistration is required.

A sample of this class project is available at the shop!

Your email is required so we can send you the supply list! All supplies are readily available at Jo-Ann or your local quilt shop.

Machine Owners’ Class 3 – Embroidery Basics

MegaEndlessHoop

This class is just the beginning of the wonderful world of Husqvarna Viking® embroidery!  It gives basic instructions on how to achieve beautiful embroidery using your new Husqvarna Viking® embroidery machine. Please bring your machine, embroidery unit, USB stick with designs, design book, bobbin filled with bobbin fill, and embroidery thread.

Includes the following machines:

  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 25
  • Husqvarna Viking® Designer Topaz™ 30
  • Husqvarna Viking® Designer Topaz™50
  • Husqvarna Viking® Designer Ruby deluxe™
  • Husqvarna Viking® Designer Diamond deluxe™

Having attended Machine Introduction and Decorative Stitches is helpful, but not necessary.

No charge for class. Please preregister for this class online or by calling VSG #766.

Machine Owners’ Class 3 – Embroidery Basics

MegaEndlessHoop

This class is just the beginning of the wonderful world of Husqvarna Viking® embroidery!  It gives basic instructions on how to achieve beautiful embroidery using your new Husqvarna Viking® embroidery machine. Please bring your machine, embroidery unit, USB stick with designs, design book, bobbin filled with bobbin fill, and embroidery thread.

Class size is limited.  Preregistration is required.

Includes the following machines:

  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 25
  • Husqvarna Viking® Designer Topaz™ 30
  • Husqvarna Viking® Designer Topaz™50
  • Husqvarna Viking® Designer Ruby deluxe™
  • Husqvarna Viking® Designer Diamond deluxe™

Having attended Machine Introduction and Decorative Stitches is helpful, but not necessary.

No charge for class. Please preregister for this class online or by calling VSG #766.

Serger Owners’ Class 1 – Serger Basics

This class is an introduction to your new serger. Learn the basic features of your machine including how to overlock and coverstitch or rolled hem. Please bring your machine, accessories, machine owner’s manual, and serger thread.   Please preregister online or by calling VSG #766 Austin-South.

Includes the following machines:

  • Husqvarna Viking® H|Class™ 200S
  • Husqvarna Viking® Huskylock™ s21
  • Husqvarna Viking® Huskylock™ s25
  • Singer 14CG754 ProFinish

No charge for this class.  Preregistration is required.

Serger Owners’ Class 2 – Serger Basics II

This class is a continued introduction to your new serger. Learn the basic features of your machine including how to overlock and coverstitch or rolled hem. Please bring your machine, accessories, machine owner’s manual, and serger thread.   Please preregister online or by calling VSG #766 Austin-South.

Includes the following machines:

  • Husqvarna Viking® Huskylock™ s21
  • Husqvarna Viking® Huskylock™ s25

No charge for this class.  Preregistration is required.

Serger Owners’ Class 1 – Serger Basics

This class is an introduction to your new serger. Learn the basic features of your machine including how to overlock and coverstitch or rolled hem. Please bring your machine, accessories, machine owner’s manual, and serger thread.   Please preregister online or by calling VSG #766 Austin-South.

Includes the following machines:

  • Husqvarna Viking® H|Class™ 200S
  • Husqvarna Viking® Huskylock™ s21
  • Husqvarna Viking® Huskylock™ s25
  • Singer 14CG754 ProFinish

No charge for this class.  Preregistration is required.

Machine Owner’s Class 1 – Machine Introduction

Meet your machine 2 copyThis will be a class for new machine owners.  Join us with your new Singer or Husqvarna Viking sewing machine to learn the basics!  Bring your machine, power cord, foot pedal and thread.  We will supply the fabric for the class.

Machine Owner’s Class 1 – Machine Introduction

This will be a class for new machine owners.  Join us with your new Singer or Husqvarna Viking sewing machine to learn the basics!  Bring your machine, power cord, foot pedal and thread.  We will supply the fabric for the class.

Machine Owner’s Class 1 – Machine Introduction

This will be a class for new machine owners.  Join us with your new Singer or Husqvarna Viking sewing machine to learn the basics!  Bring your machine, power cord, foot pedal and thread.  We will supply the fabric for the class.

Machine Owner’s Class 1 – Machine Introduction

This will be a class for new machine owners.  Join us with your new Singer or Husqvarna Viking sewing machine to learn the basics!  Bring your machine, power cord, foot pedal and thread.  We will supply the fabric for the class. Please preregister for this class online or by calling VSG #766 Austin-South.

Preregistration is required.

Machine Owners’ Class 3 – Embroidery Basics

This class is just the beginning of the wonderful world of Husqvarna Viking® embroidery!  It gives basic instructions on how to achieve beautiful embroidery using your new Husqvarna Viking® embroidery machine. Please bring your machine, embroidery unit, USB stick with designs, design book, bobbin filled with bobbin fill, and embroidery thread.

Includes the following machines:

  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 30
  • Husqvarna Viking® Designer Ruby deluxe™
  • Husqvarna Viking® Designer Diamond deluxe™

Having attended Machine Introduction and Decorative Stitches is helpful, but not necessary.

No charge for class. Please preregister for this class online or by calling VSG #766.

Zippers, Zippers, Zippers – April 15, 2014

Back by popular request. This class features 3 zipper techniques to add to your skill repertoire – Basic invisible zipper, Basic home dec lapped zipper, and a Craft zipper application for  whatever – we’ll make a quick cosmetic bag.

Machine Owners’ Class 2 – Decorative Sewing

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • All Husqvarna Viking® Models
  • All Singer® Models

Having attended Machine Introduction is helpful, but not necessary. Please preregister for this class.

No charge for this class

Sewing Club – April 13, 2014

Charming Abbey Lane pattern Pin/Cushion Scrap bag. Pick the right fabrics and this will perk up your sewing room after a long winter. Keep this for yourself or give it as a gift to one of your favorite sewist friends.

 

Cheerful and Charming

Cheerful and Charming

This is easily a stash project!
This is easily a stash project!

 

Embroidery Basics – Topaz 20, 25 and 30

This class is just the beginning of the wonderful world of Husqvarna Viking® embroidery!  It gives basic instructions on how to achieve beautiful embroidery using your new Husqvarna Viking® embroidery machine. Please bring your machine, embroidery unit, USB stick with designs, design book, bobbin filled with bobbin fill, and embroidery thread.

Includes the following machines:

  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 25
  • Husqvarna Viking® Designer Topaz™ 30

Having attended Machine Introduction and Decorative Stitches is helpful, but not necessary.

No charge for class if purchased at Viking Sewing Gallery.

Decorative Stitches – Eden Rose, Sapphires (except 960), Topaz 20, 25 and 30

Owner’s Class 2

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Eden Rose
  • Sapphire (except 960)
  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 25
  • Husqvarna Viking® Designer Topaz™ 30

Having attended Machine Introduction is helpful, but not necessary.

No charge for this class if machine purchased at Viking Sewing Gallery.

Machine Introduction – Eden Rose, Sapphires (except 960), Topaz 20, 25 and 30

Owner’s Class 1

This class is an introduction to your new Husqvarna Viking®  sewing machine. Learn the basic features of your machine including how to create buttonholes and do a blind hem. Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Eden Rose
  • Sapphires (Except 960)
  • Topaz 20, 25 and 30

No charge for this class if machine purchased at Viking Sewing Gallery.

6D – Express Design Wizard and Card Shop

6D™ Part 3

Use the  6D™ Embroider Express Design Wizard to create three very different designs using only a few clicks and create a greeting card using 6D™ Card Shop.

For owners of 6D™ Extra and 6D™ Premier

Please bring laptop with 6D™ loaded and activated dongle  If you do not have a laptop, please notify store.

Prerequisite

  • Part 1 – Configure and Explorer Plug In – 6D™
  • Part 2 – Monogram Wizard, loading designs, etc. -6D™

No Charge if 6D™ was purchased at Viking Sewing Gallery

Decorative Stitches – Opal’s, Eden Rose, Sapphires (except 960), Topaz 20, 25 and 30

Owner’s Class 2

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Opal
  • Eden Rose
  • Sapphire (except 960)
  • Husqvarna Viking® Designer Topaz™ 20
  • Husqvarna Viking® Designer Topaz™ 25
  • Husqvarna Viking® Designer Topaz™ 30

Having attended Machine Introduction is helpful, but not necessary.

No charge for this class if machine purchased at Viking Sewing Gallery.

Machine Introduction – Opal’s, Eden Rose, Sapphires (except 960), Topaz 20, 25 and 30

Owner’s Class 1

This class is an introduction to your new Husqvarna Viking®  sewing machine. Learn the basic features of your machine including how to create buttonholes and do a blind hem. Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Opal
  • Eden Rose
  • Sapphires (Except 960)
  • Topaz 20, 25 and 30

No charge for this class if machine purchased at Viking Sewing Gallery.

6D – Monogram Wizard, Loading designs, saving/exporting designs

6D Owner’s Class 2

Learn about the menu bars and navigation through 6D™

Use your 6D™ Embroidery to work with letters, loading embroideries, Monogramming, and saving / exporting your designs for your embroider machine .

For owner’s of 6D™, 6D™ Extra and 6D™ Premier

Please bring laptop with 6D™ loaded and activated dongle  If you do not have a laptop, please notify store.

Prerequisite

  • Configure and Explorer Plug-in

No Charge if 6D was purchased at Viking Sewing Gallery

6D – Configure and Explorer Plug-in

6D Owner’s Class 1

Learn the fundamentals of  6D™ Configure and 6D™ Explorer Plug In.

Review setting up your software for use with your Embroidery machine in 6D™ Configure

Manage your designs with the  6D™ Embroidery System Windows® Explorer Plug-In. View embroideries and design files as thumbnail images, then print, convert or send them to your connected embroidery machine.

For Owner’s of 6D™, 6D™Extra and 6D™ Premier.  You will need your laptop with 6D loaded plus your Dongle.

No Charge if 6D was purchased at Viking Sewing Gallery.

Decorative Stitches – Opals only

Owner’s Class 2

Learn to use your machine’s decorative stitches and how to program on your new machine.  Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Opals

Having attended Machine Introduction is helpful, but not necessary.

No charge for this class if machine purchased at Viking Sewing Gallery.

Machine Introduction – Opal’s and Emerald’s

Owner’s Class 1

This class is an introduction to your new Husqvarna Viking®  sewing machine. Learn the basic features of your machine including how to create buttonholes and do a blind hem. Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Opal
  • Emeralds

No charge for this class if machine purchased at Viking Sewing Gallery.

Machine Introduction – Emerald’s only

Owner’s Class 1

This class is an introduction to your new Husqvarna Viking®  sewing machine. Learn the basic features of your machine including how to create buttonholes and do a blind hem. Please bring your machine, all accessories, power cord, foot control, machine user’s guide, and sewing thread.

Includes the following machines:

  • Emeralds

No charge for this class if machine purchased at Viking Sewing Gallery.

Embroidery Club – Evening Clutch (in the hoop!!)

Hi All :)!

Many of you have seen this little number floating around the department… time to make it as an embroidery club project! The entire project is done IN THE HOOP – You will need one of the following machines:

Topaz 50
Ruby
Ruby Deluxe
Diamond
Diamond Deluxe
Diamond Royale

Don’t have a touch screen embroidery machine? No problem, you can borrow one of the 3 I have in store for just an additional $10 and join in on our fun!

You will receive a fabric and notion requirement list as soon as I receive your class reservation request (don’t worry, it’s not lengthy!)

Hope to see you there!

20140221_102105

6D Software Class #1

*SOFTWARE CLASSES ARE PROGRESSIVE AND WILL BE OFFERED TWICE MONTHLY*

6D Software Basics is an introductory course designed to allow new software users to become familiar with and comfortable using their 6D software! Must have 6D Embroidery program or higher.  The supply list is small, but very important:

Laptop with 6D program loaded onto it, a mouse and power cord

Dongle

USB

Paper and Pen (optional)

We will assign homework after each class for additional practicing! See you there!

 

Embroidery Basics

Welcome to the 3rd level of machine owners classes –  Embroidery Basics! This class will walk you through a basic stitch out – from beginning to end. Level one (owners basics) completition required. Topics covered include:

Design File Trasfer

Proper Hooping Techniques

Types of Stabilizers

Design setup: how to position design on screen, how to choose proper hoop size, how to rotate and resize, how to manipluate stitch order and count, how to delete stop functions in lettering

And, if time allows, Applique by Machine Embroidery

Please be sure to bring all necessary machine accessories (ie the embroidery unit, power cord, foot pedal, etc) . In addition, you will need the small hoop that comes with your machine, fabric (prefer solid cotton), bobbin thread, stabilizer, 3 -4 colors of embroidery thread, USB stick that comes with your machine, and your thinking cap!

Machine Owner Basics

The New Machine Owner Basics class is recommended for all first time sewing machine users, as well as all new machine owners! This class will leave you feeling comfortable enough to start tackling projects with your new machine! Topics include:

Accessory Overview

SMA discussion

Needle Types

Bobbin Winding

Proper Threading

Stitch Navigation

Stitch Manipulation

Buttonholes

Sewing on stretch Fabric

Please be sure to bring your machine and all the necessary accessories to use it (ie power cord, foot pedal, etc). You will also need about a fat quarters worth of plain cotton fabric, and a contrasting thread color to practice stitching with.

 

Foot of the Month Quilt – Block Two!

The Foot of the Month Quilt is back! Block #2 – Gimping and Applique feet!

Each month, we will complete one block using one or more specialty Viking feet. After all 12 blocks are complete, we piece and quilt it! This beautiful completed quilt was done by Judy Foster:
20130817_162239

20130817_162255    20130817_162312

Some of the specialty feet we will learning to use include:

3 and 7 hole yarn feet

Gimping foot

Fancy trim foot

Yarn and Ribbon couching feet

Flat felled foot

Spanish hem foot

Pintucking foot

Candlewicking feet

Applique feet

Dual feed/walking foot

and many more!

Fabric and notion requirements will be sent via email once I receive your reservation request.

Class cost $10. However, if you purchase the specialty feet from our store, you will receive a $10 discount for each foot your purchase!

Serger Basics

Welcome to serger basics! This class is designed for all skill level machine owners, and is highly recommended for first time serger owners or new serger model owners! You will learn:

– proper threading of your machine (4 thread overcast)

-converting to a 3 thread narrow stitch

-converting to a 3 thread rolled hem

 

We also cover stitch length adjustments, differential feed use, needle replacement, tension adjustments, and basic machine cleaning.

Please bring your serger and all accesories for it, about 1/4 yd of plain cotton or flannel fabric, and 4 different colors of serger thread (just one spool of each color).

Machine Owner Basics

The New Machine Owner Basics class is recommended for all first time sewing machine users, as well as all new machine owners! This class will leave you feeling comfortable enough to start tackling projects with your new machine! Topics include:

Accessory Overview

SMA discussion

Needle Types

Bobbin Winding

Proper Threading

Stitch Navigation

Stitch Manipulation

Buttonholes

Sewing on stretch Fabric

Please be sure to bring your machine and all the necessary accessories to use it (ie power cord, foot pedal, etc). You will also need about a fat quarters worth of plain cotton fabric, and a contrasting thread color to practice stitching with.

 

Serger Basics

Welcome to serger basics! This class is designed for all skill level machine owners, and is highly recommended for first time serger owners or new serger model owners! You will learn:

– proper threading of your machine (4 thread overcast)

-converting to a 3 thread narrow stitch

-converting to a 3 thread rolled hem

 

We also cover stitch length adjustments, differential feed use, needle replacement, tension adjustments, and basic machine cleaning.

Please bring your serger and all accesories for it, about 1/4 yd of plain cotton or flannel fabric, and 4 different colors of serger thread (just one spool of each color).

Machine Owners Advanced

The Advanced Machine Owners class is for all Viking machines, as well as any electronic Singer machine. We cover many topics in this class including:

One Step Buttonholes

Zipper Insertion

Blind Hems

Free Motion Quilting

Programming

Alphabet Use

Sewing Advisor

Sensor System

You must complete a Owners Basics class before you may take the advanced course.  Supply wise, please bring your sewing machine (and all necessary accessories), about 1/2 yd of plain cotton fabric, a small standard zipper (4-7 in. preferred), a 12″ x 12″ square of batting if you wish to learn the free motion quilting, and of course, thread!

6D Software Class #1

*SOFTWARE CLASSES ARE PROGRESSIVE AND WILL BE OFFERED TWICE MONTHLY*

6D Software Basics is an introductory course designed to allow new software users to become familiar with and comfortable using their 6D software! Must have 6D Embroidery program or higher.  The supply list is small, but very important:

Laptop with 6D program loaded onto it, a mouse and power cord

Dongle

USB

Paper and Pen (optional)

We will assign homework after each class for additional practicing! See you there!

 

Machine Owner Basics

The New Machine Owner Basics class is recommended for all first time sewing machine users, as well as all new machine owners! This class will leave you feeling comfortable enough to start tackling projects with your new machine! Topics include:

Accessory Overview

SMA discussion

Needle Types

Bobbin Winding

Proper Threading

Stitch Navigation

Stitch Manipulation

Buttonholes

Sewing on stretch Fabric

Please be sure to bring your machine and all the necessary accessories to use it (ie power cord, foot pedal, etc). You will also need about a fat quarters worth of plain cotton fabric, and a contrasting thread color to practice stitching with.

 

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 fat eighth  of chosen fabric:  cut 2 pieces of fabric measuring 6″ by 9″.  Fold the top of these fabric pieces 2″ down from the top and press ( will be wrong sides together.)
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or one fat eighth of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 Fat Eighth of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 Fat Eighth of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 fat eighth  of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 fat eighth of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

Embroidered Drawstring Bag — In-the-hoop

In this class you will be embroidering an in-the-hoop drawstring bag using Inspira Butterflies & Bug design #104.  You will have a choice of three designs from this Inspira card and the drawstring bag requires 2 hoopings.  We are going to use Clear N Melt (12″ wide) stabilizer as our main hoop stabilizer.  Recommended fabric for your project can be cotton, organza, silk dupioni, or satin.  Also, you will need your choice of colored ribbon for the bag drawstrings. These bags can be a delightful means of storing jewelry, potpourri, party favors or your choice of items. These adorable bags do not require you to use the sewing mode of your Viking machine but is accomplished during the in-the-hoop embroidery process.

 

Featured Items:                                         Part #                    Retail Price         Club price (-15%)  

Inspira Butterflies & Bug #104           620093696                  $39.95                         $33.96

90 Embroidery needles                        620099496                  $  4.49                         $  3.82

Sensor Q foot                                      413192045                  $39.95                         $33.96

240 x 150   hoop  OR                          412527102                  $74.95                         $56.21 (-25%)

260 x 200 hoop     OR                         413116 501                 $89.95                         $67.46 (-25%)

180 x 130 hoop (5 x 7)  OR                920085096                 $129.95                        $97.46 (-25%)

180 x 130 Metal Hoop                                    920362096                 $119.95                        $89.96 (-25%)

Clear N Melt (12” x 25 yds)               6201415096                 $ 25.95                        $22.06

505 Adhesive Spray                             140000504                 $ 12.99                                    $11.04

Straight stitch Plate should be used in conjunction with the sensor Q Foot for best results

 Class:      Class fee $10.00 (you can purchase stabilizer for $1.00 per sheet if necessary)   

 What to Bring:  Please label all items so they do not get lost!

  • Hoop:  One of the above listed.  Bring Hoop Clips.
  • Machine, Embroidery Arm, power cord, foot control, small sharp embroidery scissors, pins, marking pen, etc.
  • Sensor Q Foot & Straight Stitch plate (if available).
  • Needles and a small safety pin (used for inserting ribbons into bag casement).
  • Clear N Melt stabilizer and 505 adhesive spray.

FABRIC AND THREADS:

  • 1/4 yard or 1 fat eighth of chosen fabric:  Cut 2 pieces of fabric measuring 6” x 9”.  Fold the top of these fabric pieces 2” down from the top and press (will be wrong sides together).
  • 3/16” x 36” ribbon (choice of color for drawstrings).
  • Embroidery threads – choice of colors for your chosen design and filled matching bobbins.  Or a pre-wound bobbin can be used.
  • Cotton or polyester thread that co-ordinates with your chosen fabric with a filled matching bobbin so that you can complete your the in-the-hoop bag assembly.

(321) 676-5524

New Owner’s Embroidery Class Four

Advanced Embroidery Class.

You will customize your design on your hand towel.  Learn how to transfer designs to and from your computer directly to your embroidery machine.

Please bring your machine, laptop, embroidery unit,  hoops, hand towel, USB stick with designs, design book, bobbin, and embroidery thread.

Includes the following machines:

  • Designer Topaz 20,25, 30 and 50
  • Designer Ruby deluxe
  • Designer Diamond deluxe
  • Designer Diamond Royale

No charge for class.

Serger Basics II

This class is a Continuation on learning the basics to your new serger. Learn threading techniques and more. Including Coverstitch and 5 thread (on s25 model.)

Includes the following machines:

Husqvarna Viking Huskylock s21

Husqvarna Viking Huskylock s25

You will need to bring Your Serger, four different colors of thread and scissors to class.

Limited space so sign up or call early. 1-586-294-2680.

S-21

Serger Basics

This class is an introduction to your new serger purchased from our Viking Sewing Gallery. Learn basic features of your serger machine including how to thread a over lock and a rolled edge stitch.

You will need to bring Your Serger, four different colors of thread and scissors to class.

Limited space so sign up or call early. 1-586-294-2680.

S-21

Machine Introduction Class

Our new machine owner’s class is for the Viking 116, 118, H100 and select Singer Machines.

This fun class is to teach you the basic functions on your new machine.

You will need to bring your machine, accessories, pastel thread, and scissors.

 

This is a complimentary class for the select machines listed above and more.

Please feel free to call with questions and also to reserve your place in class.

Call : 1-586-294-2680.

There are many times available, please sign up early because space is limited.

quantumstylist_9960_238x111