Learn how to use 6 different presser feet for your serger when you make this unique bag. Optional: You can also (if you wish and if there is time) learn how to install a top zipper gusset so you can keep your bag closed. The extra feet used are:
- gathering foot
- elastic foot
- taping foot
- piping foot
- blindhem foot
- beading foot
To take this class, you should have already taken the Serger Basics owner’s class. You MUST be able to thread your serger, adjust tensions, and remove/insert needles.
Supply List
- Serger, its accessories, manual, power cord, and foot control
- You will need the following feet for your serger. We have these in our Viking Sewing Gallery for the Huskylock H-Class 200S, S-21, and S-25 and the Singer 14CG754 only. If you have an older model or another brand, we do not have feet to fit your serger. If you want to test drive a foot that you do not own to see if you want to purchase it, you may.
- gathering foot*
- elastic foot*
- taping foot*
- piping foot*
- blindhem foot*
- beading foot*
- 4 cones of Metler serger thread*
- 1/4 yd. of six coordinating print fabrics
- 2/3 yard fabric for lining, handles, and pocket
- 10″ piece of 1/4″ or 1/2″ elastic
- 1 yard 4mm strung craft pearls
- 1 yd. 1/4″ wide ribbon
- 1 yd. packaged piping to compliment your fabric
- 1 yd. 1″ wide flat lace, embroidered insertion, or lace hem tape
- 2 yds. 1/4″ or 1/2″ wide fusible web*
- 22″ zipper
- Rotary cutter and ruler
- 1/2 yd. fusible quilt batting*
- hand sewing needle
- Basic sewing kit
- If you decide to do the zipper insert, you will also need a sewing machine.
*These items are available for purchase in our Viking Sewing Gallery.
